Afshan cable design and production history dates back to the late 70s. When they produced the first cable, they were trying to produce a cable with a plastic coating, but because the technology progress was slow at that time, this project was practically not feasible. Before they produced cables with a plastic coating, the coating of the cable was It was a type of natural rubber called gutta-percha. In 1980, the wire and cable industry entered a new world in the production of cable. This year, they were able to cover and insulate the Afshan cable with impermeable materials
In 1980, the wire and cable industry entered a new world in the production of cable. This year, they were able to cover and insulate the cable with impermeable materials.
The cable consists of several strands of wire twisted together. If these strands of wire are made of copper, it is a copper cable, and if it is made of aluminum, it is an aluminum cable. Basically, the electric cable is divided into three parts: the insulated cable, the semi-extruded cable, and the wire cable.
Conductors that are used in flexible cables must have the following requirements:
The material of the conductors is annealed copper with coating or plain
The nominal diameter of the wires of each conductor must be the same
The diameter of the wires of each conductor should not exceed the maximum values given in the standard
The resistance of each conductor at 20 degrees Celsius should not exceed the maximum value specified in the standard
Unfortunately, despite the high electrical resistance determined for this conductor, it has a very high consumption in Iran
The conductors of this category are divided into groups five and six, the conductors of group six have more flexibility than the conductors of group five.
From conductor group one to group six, flexibility and conductor strands increase. But the cross section remains constant.
Lightning cable
Afshan cable is made of a large number of thin conductor strands. Also, this type of cable is flexible and can be bent and shaped as desired. It does not break easily and is more resistant than other cables, including wire.
Sprayed cables are also called cable or soft wire.
This type of cable can usually be used indoors or over short distances
Afshan cables, like cables and wires, can withstand a voltage between 300 and 500 volts.
Effervescent cable is more flexible than semi-effervescent cable.
Fashan cable has better flexibility and can be used in dry and humid places.
If more flexibility and moderate mechanical properties are needed, they use wire and cable.
Kabel Afshan review – Kabel Afshan features
The spray cable is often designed in a round shape, which despite its high usage and general consumption, there are weaknesses in its structure. After years of Afshan cable production, this cable is known as a normal cable in the industry. These cables are mostly used in automatic and general production factories, as well as renewable energies.
But the flat cable design is the best alternative to the round cable today. This cable is a suitable solution for power supply and data transmission in medical devices, semiconductors, and civil aircraft compared to other options. Basically, flat cables do not tend to be wrapped on the reel and are more interested in companies that manufacture overhead cranes.
Round cable or flat cable
To buy a spray cable, you have to consider many parameters and criteria. First of all, note that the weight of the cable is not a good measure to determine the quality of the cable. Second, in addition to the weight, the price of the Afshan cable cannot be a good measure for the originality of the cable because there are sellers who price the original cable over the fake cable and sell it to the customer instead of the original cable. You should always go to reputable stores to buy Afshan cable, because the credibility and history of the store can always be a good criterion for buying Afshan cable.
Afshan cable purchase criteria
No comment